Dixon 52 - 27 KOH - Manual (Page 40)

CARE AND MAINTENANCE
40
CAUTION
!
Stop engine and remove ignition key
for safety. Wear heavy, thick gloves
when holding onto cutter blade, avoid
the sharp edge of the blade.
CUTTER BLADE MAINTENANCE
Check sharpness of mower blades after every 10 hours of
operation. Observe proper blade position prior
to removal.
1. Safely raise front of mower.
2. Hold or block blade from turning.
3. Loosen blade bolt and remove blade.
4. When replacing blade, tighten blade bolt
securely. Tighten blade bolt to 60 ft.
lbs. (81Nm)
Blades should be discarded when worn excessively.
DANGEROUS!
Do not use blade
in this condition!
When notch starts,
discard blade
New blade