Time functions – Highgear Aerial User Manual
Page 15

14
english
TIme funcTIons
VieW tiMe zone 1 / tiMe zone 2
The ATF8 / Alterra / Altiforce / Aerial unit is equipped with a full feature
watch package including Time of Day, Day/Date/Day of Week, Two Time
Zones and Two Daily Alarms.
The Time Zone being displayed is indicated by a small t1/t2 in the
lower left corner of the display.
VieW / Change tiMe zone: press & hold the s2 key
setting the tiMe oF day
1. Start in tiMe Mode.
2. Select tiMe 1 or tiMe 2 using the s2 key.
3. press & hold the s5 to enter the setting sequence.
4. Adjust hour, Minutes, seConds, year, Month, date,
12/24 hour mode using the s1 and s2 keys. The variable being
programmed (Hours, Min, Sec, etc.) will be shown in the Bottom
Line of the display.
Note: The minutes can only be adjusted in tiMe 1.
5. Set each variable using the a QuiCK press of the s4 key.
6. Exit setting sequence using the s5 key.
7. Select alternate time and repeat the above procedure.