Assembly – Dixon 968999515 User Manual

Page 7

ASSEMBLY

MOUNTING COVER ASSEMBLY TO
SUPPORT ASSEMBLY
(See Figure 2)

NOTE: For ease of assembly, you may wish to
obtain the assistance of another person for
mounting cover assembly to mower.
1. Position cover assembly on ground behind

mower as shown.

2. Lift and rotate cover to align cover brackets

with support assembly tubes.

3. Slide cover assembly down onto the support

tubes.

FIGURE 2

COVER
ASSEMBLY

SUPPORT
ASSEMBLY

BAGGER SUPPORT ASSEMBLY
(See Figures 1A and 1B)

1. Remove rear engine guard (if installed) by

removing the six bolts that attach the guard to
the frame.

2. Place hitch Part No. 539113090 on the rear of

the mower.

3. Install two (2) previously removed bolts

(539107475) thru rear of the hitch weldment.

4. Secure the sides of the hitch to the frame

with four (4) bolts (539107899) and four (4)
washers (539990598) two per each side.

FIGURE 1A

FIGURE 1B

ENGINE
GUARD
BOLTS

REAR ENGINE GUARD

ENGINE
GUARD
BOLTS

PREVIOULY REMOVED
HARDWARE

HITCH

WASHER, 1/4

BOLT, 5/16-18 X 3/4, GR8