Hansol 910A - Manual (Page 5)

User’s Manual 9
ENGLISH
User’s Manual 8
Controls Controls
OSD controls
"ON SCREEN DISPLAY MENU" controls include the following extended controls such as Size,
Position, Geometry, Color Adjust, Brightness and Contrast Utilities. Adjustments are saved
instantly. The currently addressed control can be reset to factory settings by pressing the Reset
button.
Function of OSD buttons on the front of the monitor
DO : Displays OSD main Menu.
1) When Main menu is displayed. : Selects function with RED ICON.
2) When Submenu is displayed. : Selects function with RED ICON.
1) When no OSD on the Screen,
In the main menu, move the function to select one of the controls.
In submenu, adjust the bar to increase or decreases the adjustment.
2) When no OSD on the Screen,
/ : Direct Brightness access.
/ : Direct Contrast access.
Additional front controls
Power Switch : Turns the monitor power on or off. When the power is on, the LED is on.
LED Power indicator Light : Located up side of the power switch and indicates the monitor's
power mode. Each mode reduces the amount of power used by the monitor.
Accessing on screen menu
Press DO Button.
Turning off on screen menu
When in the main menu, press the EXIT button.
When in submenus, press the EXIT button twice.
E X I T D O
OSD Menu
OSD MENU DO
1. NO OSD Proceeds to NO.2 Proceeds to Proceeds to No meaning
NO.3 NO.4
2. MAIN MENU The function with RED Moves to function you want. Exit to No.1
ICON is
- Performed : Recall,
Degauss
- Selected and blinked
: Color Adjust, Zoom
- Proceeded : Others
3. BRIGHTNESS Moves to No.2 Decreases the Increases the Exit to No.1
brightness brightness
4. CONTRAST Moves to No.2 Decreases the Increases the Exit to No.1
contrast contrast
5.H/V-POSITION Proceeds to NO.6 Moves the Moves the Exit to No.2
image down or image up or
left in the
right in the
selected selected
function.
function.
6. H/V-SIZE Proceeds to NO.5 Shrinks the Expands the Exit to No.2
image in the image in the
selected selected
function. function.
7.GEOMETRY No meaning Controls the amount of the Exit to No.2
Selected funcion. (Refer to Geo-
metry controls menu in detail)
Moves to function you want.
POSITION
PRESS MENU KEY
BRIGHTNESS
50
PP 31.5KHz 60Hz
CONTRAST
PP
50
31.5KHz 60Hz
H. POSITION
50
H. SIZE
50
50%
PINCUSHION
PARALLELOGRAM
TRAPEZOID
PINBALANCE
ROTATION
GEOMETRY
50