Dukane 8755E-RJ - Manual (Page 88)

Network Functions
Network Functions
Configuring and Controlling the Projector via a Web Browser
You can change the settings of or control the projector via a network by using a
web browser from a PC that is connected to the same network.
(
 4)
Failure & Warning Alerts via E-mail
The projector can automatically send an alert to specified e-mail addresses when
the projector requires maintenance or has encountered an error.
(
 26)
Projector Management via SNMP
This projector is SNMP (Simple Network Management Protocol) compliant,
allowing you to monitor it from a remote location using SNMP software. In
addition, the projector is able to send failure & warning alerts to a specified PC.
(

28)
Controlling the Projector via Scheduling
You can schedule the projector to perform various functions according to the
DATE and TIME.
(

29)
Still Image Transfer
The projector can display still images that are transferred via the network.
(

32)
Projector Control via RS-232C via the Network
The projector can be controlled using RS-232C commands over a network.
(
 34)
This projector is equipped with the following network functions.
RJ Only.