Gullco KBM-28U - Manual (Page 3)

1
READ BEFORE USING THE KBM
®
-28U BEVELLER
Please refer to the KBM
®
-28 Portable Plate Edge Bevelling Machine Parts
List & Operating Instructions document (GD-047) for all other information
not contained within this supplemental manual, as it contains all of the
major wear components used in the KBM
®
-28U machine along with similar
principles of operational procedure, safety instruction, maintenance etc.
KBM
®
-28U PLATE EDGE BEVELLING MACHINE DETAILS
This manual (in combination with the KBM
®
-28 manual, GD-047) covers the operation instructions,
maintenance requirements and provides parts lists for the Gullco Inverted Plate Edge Bevelling
Machine, part number: KBM
®
-28U.
DECLARATION OF CONFORMITY - CE - designed and manufactured in compliance with
2006/42/EC provisions and further amendments.
MACHINE SPECIFICATIONS
Maximum Bevel Width: 1.10" [28 mm] at standard 30° bevel angle on material with a
tensile strength of 64,000 lb/in² [45 Kg/mm²] (multiple passes)
Maximum Bevel Depth: 0.95" [24.2 mm] at standard 30° bevel angle on material with a
tensile strength of 64,000 lb/in² [45 Kg/mm²] (multiple passes)
Minimum Plate Thickness: 5/16" (8.0 mm)
Maximum Plate Thickness: 2" (50 mm)
Bevel Speed: 10’ [3 m] per minute
†
Motor: 3 H.p., 3 phase, available for 230, 460 and 575 V at 60 Hz. and
also 380 and 400/415 V at 50 Hz. supply
Gearbox Oil: 4.8 US Gallon (18 Litres) of Shell Tivera S 320 ( See section
“Periodic Inspection & Maintenance” for further details )
Weight: 924 lbs. [420 Kg.] including hydraulic undercarriage assembly
†
Top speed can vary depending on variations of bevel depth, voltage and frequency.