Directed Electronics DV2000 - Manual (Page 20)

20 © 2002 Directed Electronics, Inc.
WIRING CONNECTIONS
1. POWER CONNECTOR - The RED fused power
wire must be connected to a wire that has
(+) 12 volts when the key is in the acces-
sory position. The BLACK ground wire must
be connected to a paint-free, clean metal
chassis point, preferably scraped sheet
metal.
2. EXTERNAL REMOTE CONTROL CONNECTOR -
Insert the 1/8" pin plug for the External
Remote Sensor eye into this socket.
3. VIDEO SIGNAL - Connect the YELLOW
Composite Video RCA cable to this jack.
4. AUDIO SIGNAL - Connect the system L/R
stereo Audio RCA cables to these jacks.