Grandstream GXV3672_HD Quick Installation Guide - Manual (Page 4)

~
3
~ ~
4
~
Option A
S
tep 1: Insert the power adapter into the 12V DC
socket of the tail cable in GXV3672_HD/FHD.
Plug the other end of the adapter into an AC
power outlet.
S
tep 2: Plug an RJ45 Ethernet cable into the network
socket of the tail cable in GXV3672_HD/FHD.
Plug the other end into a switch/hub or router.
Option B
S
tep 1: Plug an RJ45 Ethernet cable into the network
socket of the tail cable in GXV3672_HD/FHD.
Plug the other end into a Power over
Ethernet (PoE) switch.
GXV3672_HD/FHD CONFIGURATION
Configuring the GXV3672_HD/FHD using Firefox,
Chrome or Microsoft Internet Explorer (with related
plug-in installed)
S
tep 1: Download and install GS_Search tool:
http://www.grandstream.com/products/
tools/surveillance/GS_Search.zip
S tep 2: Run the Grandstream GS_Search tool.
S tep 3: Click on button to start device
detection.
S tep 4: The detected devices will appear in the
output field as below.
Connect the GXV3672_HD/FHD to a DHCP
Server Enabled Network