Grandstream GXV3610 v2 Series Quick Installation Guide - Manual (Page 5)

~
5
~ ~
6
~
Option A
Step 1: Insert the power adapter into the 12V DC
socket of the tail cable in GXV3610_HD/
FHD. Plug the other end of the adapter
into an AC power outlet.
Step 2: Plug an RJ45 Ethernet cable into the net-
work socket of the tail cable in GXV3610_
HD/HD. Plug the other end into a
switch/hub or router.
Option B
Step 1: Plug an RJ45 Ethernet cable into the
network socket of the tail cable in
GXV3610_HD/FHD. Plug the other end
into a Power over Ethernet(PoE) switch.
NOTE:
Use the Hex Key losing the screw in the middle ring to adjust
camera during installation and tight it when done.
GXV3610_HD/FHD CONFIGURATION
Configuring the GXV3610_HD/FHD using Firefox,
Chrome or Microsoft Internet Explorer (with
related plug-in installed)
S
tep 1: Download and install GS_Search tool:
http://www.grandstream.com/products/
tools/surveillance/GS_Search.zip
S tep 2: Run the Grandstream GS_Search tool.
S
tep 3: Click on button to start device
detection.
S
tep 4: The detected devices will appear in the
output field as below.
Connect the GXV3610_HD/FHD to a DHCP
Server Enabled Network