Genee World G Touch - Manual (Page 3)

01
The Load-bearing of the mounting rack:
Please choose the rack or sliding saddle specified by the manufacturer. Make
sure that the home-made rack’s bearing capacity and also the bearing capacity of
the support platform, is 4 times more than the actual weight capacity. Keep the LED
Interactive Multi-touch Display stable at all times.
The load-bearing of the mounting surface:
The bearing capacity of the mounting surface needs to be 4 times more than the
actual weight capacity. Make sure that the material of the mounting surface is
stable enough and consists of a strong material.
Heat Dissipation
Cooling Requirements The distance from the mounting surface (cm)
Nominal Power Left/ right side Top Bottom Back
Above 100W 10 20 20 10
Tips: Keep the air flowing and make sure that the vent hole area of the top, left/right side
and bottom are no less than 50% of the sealing area, if the LED interactive multi-touch
display will be installed into a wall or box.
Installation Requirements