Genee World G-Touch PRO – All in One PC - Manual (Page 7)

7
Chapter 3 Getting Started
3.1 Connect the AC adapter
The power adapter is an international universal power adapter, power supply input
voltage ranges from 100V ` 240V.
The following is the correct installation steps:
• Connect the power cord to the AC adapter
• Connect the power cord to the power socket
• Plug the adapter DC connector to the DC port of machine
3.2 Power On
Press and hold the power button for 1-2 seconds, then release. The computer will
automatically execute the boot self test (POST).
Warnings: When the computer crashes, press the power button for 4-6 seconds
to turn off the computer.
3.3 Install Operating System
These products are shipped without installation of the operating system, users
need to install the operating system themselves.
3.3.1 Enter the BIOS settings
1. During the power-on self test, Press F2 into the BIOS settings.
2. Use the arrow keys to select the “boot”
3. Set up your system installation disk as first priority on boot