Geist L Series - Manual (Page 3)

GM1045 Rev 2 3 Rev Date: 7/28/2014
Specifications
Overview
The L Series products are In-Line Power Monitoring Units intended for connection between an AC
Mains circuit
and a Power Distribution Unit (PDU). The In-Line Power Monitoring Units are
designed to be powered by either a single phase or a three phase AC input circuit and have an
outlet or output cord and connector body for connection to an external device (such as a PDU).
The In-Line Power Monitoring Units are rated from 12 to 32 Amps depending on the unit’s
configuration. Three phase units can be configured for either a delta or wye input/output
connection. In-Line Power Monitoring Units can be configured with a Geist Local Current Meter,
Power Meter, or a remote Current Monitoring Meter to perform the monitoring functions.
Environmental
Temperature
Operating: 10°C (50°F) min 45°C (113°F) max
Storage: -25°C (-13°F) min 65°C (149°F) max
Humidity
Operating: 5% min 95% max (non-condensing)
Storage: 5% min 95% max (non-condensing)
Elevation
Operating: 0 m (0 ft) min 2000 m (6561 ft) max
Storage: 0 m (0 ft) min 15240 m (50000 ft) max
Electrical
See nameplate for unit ratings.
Networking (For Current Monitoring Meter Units Only)
Protocols
HTTP, ICMP, DHCP, TCP/IP, FTP
Ethernet Link Speed
10 Mbit; half-duplex
Data Formats (For Current Monitoring Meter Units Only)
HTML, SNMP, XML