GAMMA PROGRESSION 602FC STRINGING MACHINE (Issue 1 - April, 2000) - Manual (Page 11)

10
Clamping the First Main String
Secure the tensioned main string using the remaining
fixed clamp. Repeat the procedure for all of the remain-
ing main strings and tie off following the racquet manu-
facturers recommendations.
Follow the manufacturer's recommended stringing pat-
tern for one or two piece stringing. This will determine
the starting point for the cross strings. If applicable, tie
the first cross string using an appropriate starting knot.
STRINGING THE FRAME
Weaving the Cross Strings
Weave the cross strings over and under the main strings
being careful to alternate the weave direction of each
consecutive cross string so as to be opposite of the
previously installed cross string.
Once the final cross string is tensioned and clamped, tie
off at the appropriate hole specified by the racquet
manufacturer.