Digital Antenna POWERMAX 4KSBR-50U - Manual (Page 5)

5
3. Pre-Installation Guidelines
a. INSTALLATION TOOLS
The following tools are required for installation:
• Standard wrench and philips head screwdriver
• Standard drill with ½” bit (optional)
• Cellular phone operating on 800 or 1900 MHz bands (any USA or Canadian
cellular phone except Nextel)
• Wire fasteners (optional)
• Multi-meter for testing electrical continuity and AC and DC line voltage (for
troubleshooting only)
b. INSTALLATION PROCEDURE
Description of 4KSBR-50U system
The 4KSBR-50U Dual Band Wireless Amplifier/Repeater system provides cellular signal
coverage to interior areas that have low signal strength to adequately operate a cellular
phone. In these poor interior coverage areas it becomes difficult to place or receive calls
and usually results in a dropped call. The 4KSBR-50U dual band amplifier/repeater
system provides increased reception indoors by filtering, re-directing and amplifying the
available exterior signal. This translates into fewer dropped calls with clearer connections
and stronger signals. The 4KSBR-50U dual band system operates with all carriers in the
USA and Canada except Nextel/iDEN providers.
Functional Operation of System 4KSBR-50U
Separation Distance of 40' or more
plus a structure between outside and inside antennas
Installation requirement:
Cell Site
P/N 288-PW
Outside
Antenna
P/N 340-50NM
50' Cable
P/N 135-RD
Inside Antenna
P/N DA4000SBR
Amplifier/Repeater Unit
C e ll Sig na l d e gr ad e d
b y e x te rio r w a ll, dis tan c e
tre e s & fo lia ge , e tc....
E n h a nc e d S ig n a l
R e q u ir ed
m in . 40' p lu s stru ctu r e
be tw een a n ten n as
R e q u ir ed
O u ts id e C ell S ig n a l
(-9 0 to -7 0d B m )
The 4KSBR-50U system contains a dual band low power indoor antenna, 60dB gain
amplifier/repeater unit and 9dB gain omni-directional outdoor antenna. Both antennas
must be installed and operate in a vertical position. The indoor antenna must be used with
cable and stand. The outdoor omni-directional antenna, PN 288-PW, is installed outside