Dixon 114893 - DCK2 - Manual (Page 6)

6
UNPACKING INSTRUCTIONS
•
Remove all parts and packing materials
from carton.
• Check carton contents against list. Be sure
all parts are there.
TOOLS REQUIRED FOR ASSEMBLY
(1) 1/2" Wrenches
(1) 5/8" Socket
Ft/Lbs Torque Wrench
CARTON CONTENTS:
2 - Container Tops 1 - Cover Assembly
2 - Container Bottoms 1 - Bag of Parts
1 - Upper Chute
1 - Owner’s Manual
1 - Lower Chute
2 - High Lift Blades
PARTS IDENTIFICATION
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you
are seated on the mower in the operator’s position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
• Set parking brake.
• Place motion control levers in "NEUTRAL " position.
• Turn ignition key "OFF" and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug and place wire where it cannot come in contact with plug.
COVER
ASSEMBLY
GRASS
CATCHER
CONTAINERS