Fusion RV-CD800 - Manual (Page 15)

15
USB OPERATION
Insert the USB Device
1. Open the cover marked on the front panel.
2. Insert the USB
device into the USB
socket. The unit will
start playing from
the USB device
automatically.
3. USB storage devices can be
used in the Front, Rear USB port of both.
Removal of the USB Device
Before removing the USB device, always remember to
switch to another Source then remove the USB device.
SD CARD OPERATION
Insert the SD Card
1. Press the OPEN button on the front face.
2. After flipping down the front face, push it to the right then
draw the left of the face outwards to remove it. 3. Insert the SD card into the slot with label facing up until
a “CLICK” sound is heard.
4. Replace the front panel and the unit will start playing
files from the card automatically.
Removal of the SD Card
Detach the face and press the card until you hear a click
sound. The card is now disengaged. You can then remove
the card.
NOTE
Please ensure that USB devices & SD cards contain WMA or MP3
files only.
USING FRONT OR REAR AUX-IN
Connect the external device to AUX in jack using a 3.5mm
stereo Aux In cable (not supplied) located on the face or at
the rear of the RV-CD800, then press the Source button to
select AUX1 or AUX2 mode.
Press the Source Button again to select other
source options.