FSR RGB - 4/6 User Manual
Page 4
INSTALLATION and OPERATION
Do not connect the power line cord until all the video connec-
tions are completed.
Mount the unit in the equipment rack.
Connect alll the video cables per the diagram.
Connect the power cord.
Adjust the cable equalization, available on the first two output
channels, with the variable control (one for each of the two output
channels) for minimum distortion using an appropriate test signal
or full motion video.
Perform the final operational check.
FRONT AND REAR PHOTOS OF THE EQUIPMENT
TYPICAL APPLICATION
RGB - 4
RGB - 6