FSR CVD–144 - Manual (Page 5)

43856 LIT1003
TECHNICAL SPECIFICATIONS
• 400 MHz video bandwidth • All metal enclosure
• Four bridgeable 1x4 D/A Blocks • Blocks Rack mount ears included
• All outputs are fully buffered • Universal worldwide power supply
Video
Gain: Unity (into 75 ohm load)
Bandwidth: >400MHz (+0.1db/-3db) measured from input connector to output connector
within a block, all outputs connected.
+0.1db/-0.5db 175MHz measured from input connector to output
connector within a block, all outputs connected.
>350MHz (+0.1db /-3db) measured from input to any output connector when
fully bridged , all outputs connected.
+0.1db/-0.5db 150MHz measured from input connector to output
connector when fully bridged, all outputs connected.
Differential Phase Error: 0.04 degrees (NTSC)
Differential Gain Error: 0.04 % (NTSC)
Video Input – Each Block (4 blocks total)
Number/Signal Type: 1 analog video (NTSC, PAL, or SECAM)
Connectors: 1 BNC Female
Video Level: ±0.7Vp-p (nominal): 2.0Vp-p (maximum)
Impedance: 75 ohm
Maximum DC offset: ±1.2V (with 0.7Vp-p signal)
Video Output – Each Block (4 blocks total)
Number/Signal Type: 4 analog video matching input
Connectors: 1 BNC per output (4 total)
Video Level: ±0.7Vp-p (nominal): 2.0Vp-p (maximum)
Impedance: 75 ohm
Maximum DC offset: ±20 MV max
GENERAL
Power AC input: 110/220 VAC, 50/60 Hz
Mounting: Table top or rack mount, rack ears included
Enclosure Type/Size: Metal, 3 RU high,19” wide
CONFIGURATION CHART
(Matrix showing quantity of input x output combinations for 16 maximum outputs)