Delphi XM2GO SA10113 - Manual (Page 8)

go!
Charge the battery and store some music
2go: Store and play back with a single button
Your MyFi lets you store up to five hours of programming and
play it back at a later time. Listen to XM wherever you are,
including on an airplane, subway, or anywhere satellite
coverage may be limited. While the battery is charging in
the home stand, try storing some XM programming from
XM’s lineup of over 130 channels!
TO STORE:
1. Turn on your MyFi and select a
channel.
2. Press the “2go” button. To prevent
you from accidentally storing over
a previously stored program, your
MyFi will ask you to confirm. Press
the “2go” button again. The
center of the top line of your
MyFi’s screen switches from
“LIVE” to “REC.”
3. To stop storing and continue with
live programming, press the “2go”
button again. The display reverts to
“LIVE.”
TO PLAY BACK:
1. Press the mode button. Your MyFi switches from “LIVE” to
“MY XM”, and will begin to play back from the beginning
or where you last stopped or paused.
2. “MY XM” holds up to five hours of programming. Press
either the “ “ or “ “ button to skip to the previous or
to the next song.
3. You can also rotate the dial to view a list of the stored
artists and songs. Simply highlight an artist with the dial,
then press the dial in to listen to it.
go further...
Advanced features & additional info
Check out the User Guide for advanced features, trouble-
shooting guidelines, and additional information.