Directed Electronics AVITAL 3001L User Manual

Page 10

Valet mode

You can prevent your system from arming, by using Valet Mode. This

is very useful when washing the vehicle or having it serviced. In Valet

Mode the system will not arm, but all convenience functions (door

locks, trunk release, etc.) will work normally.

To enter or exit Valet

Mode with the Valet switch:

Turn ignition to on position,

then turn to off position.

Press and release the Valet

switch within 10 seconds.

The status LED will light steady if you have entered Valet Mode. To

exit Valet Mode, repeat the steps above. The LED turns off when exit-

ing Valet Mode.

Remote valet

Remote Valet is a convenient feature that makes bypassing the secu-

rity system easier.

This feature makes it possible to exit or enter Valet

Mode using your factory keyless transmitter.

Open any door.

Press LOCK on the transmitter.

Press UNLOCK on the transmitter.

Press LOCK on the transmitter.

The status LED will stay on if you have entered Valet Mode, and it will

go out if you exited Valet Mode.

DRW-35

The remote Valet feature will not work with all factory

Keyless system. Some keyless entry systems do not

work with a door open.