beautypg.com

Foxconn 648FX7MF-RS User Manual

Page 55

background image

47

661FX7MF/648FX7MF/648C7MF Series User Manual

Chapter 3 BIOS Description

IRQ [3-7,9-15], NMI (Default: Enabled)

This option is used to enable or disable IRQ[3-7,9-15], NMI.

IRQ 8 Break Suspend (Default: Disabled)

This option is used to enable or disable IRQ8 break suspend.

RING Power Up Control (Default: Enabled)

If this option is enable, it allows the system to resume from a software power
down or power saving mode whenever there is an incoming call to an in-
stalled fax/modem. This function needs to be supported by the relevant hard-
ware and software. The setting values are Disabled and Enabled.

MACPME Power Up Control (Default: Enabled)

This option is used to enable or disable the system to be waken up by onboard
LAN.

PCIPME Power Up Control (Default: Enabled)

This option is used to enable or disable the system to be waken up by PCI
card.

PS2KB Wakeup from S3 (Default: Hot Key)

This option is used to set which action will wake up PS/2 keyboard from S3
status. The setting values are Any Key, Hot Key, Password.

PS2MS Wakeup from S3 (Default: Click)

This option is used to set which action will wake up PS/2 mouse from S3
status. The setting values are Disabled, Click, Move & Click.

Power Up by Alarm (Default: Disabled)

This option is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be canceled. Also, the PC power
source must not be turned off. The setting values are Disabled and Enabled.

PM Wake Up Events Menu