Foxconn P45A - Manual (Page 42)

3
35
empty PCI slot to reduce EMI (Electromagnetic Interference).
SuperIO Configuration
► OnBoard Floppy Controller
This item is used to enable/disable Floppy Controller.
► Serial Port Address
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port .
► IrDA Function
This item is used to enable/disable onboard infrared chip function.
► IrDA Duplex Mode
This item enables you to determine the transfer mode of the onboard infrared chip. Setting
values are: [Full Duplex], [Half Duplex].
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
SuperIO Configuration
OnBoard Floppy Controller [Enabled] Help Item
Serial Port Address [Enabled]
IrDA Function [Enabled] Allows BIOS to Enable
IrDA Duplex Mode [Half Duplex] or disable floppy
controller.
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Enabled]