Foxconn P35AX-S User Manual

Page 32

Chapter 2 BIOS Description

Advanced BIOS Features Menu

Use the arrow keys to select the options and press to enter it.
4.1 IDE Configuration
This sub-menu is used for the configuration of IDE/SATA devices. You can
press to set the available values of items.
NOTE: The Netghost can not be used on SATA 1 and SATA 2 ports.

4.2

SuperIO Configuration

This sub-menu is used for the configuration of I/O devices, such as Floppy,
Serial Port, Parallel Port and so on.

4.3

OnBoardDevice Configuration

This sub-menu is used for the configuration of onboard devices, such as
USB controller, Graphic Adapter, HDA controller, PEG port and so on.

4.Advanced BIOS Features

3.6 Hit ‘DEL’ Message Display

This item is used to set whether to show the information about press

to run BIOS setup in POST.

3.7 Boot Device Priority
This option is used to select the priority for devices. After pressing ,

you can select the devices using the Up/Down arrow keys, and change the
devices priority using <+> or <->; you can exit this menu by pressing .

3.8 Hard Disk Drives

This is used to specify the Boot Device priority for available Hard Disk Drives.

3.9 Removable Drives
This option is used to specify the Boot Device priority sequence from available
removable drives.

PDF 文件使用 "pdfFactory" 试用版本创建