Foxconn G41S - Manual (Page 39)

3
32
USB Configuration
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
► USB 1.1 Controller
This item is used to enable or disable the Universal Host Controller Interface for USB.
► USB 2.0 Controller
This item is used to enable or disable the Enhanced Host Controller Interface for USB.
If USB devices are connected to the computer, the following item will appear :
► USB Storage Configuration
After pressing , you can set the reset delay for the USB storage device. There are
many different emulation types of this USB device, such as floppy, hard disk and CDROM can
be selected.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
USB Configuration
USB Configuration Help Item
Module Version - 2.24.3-13.4 Enables support for
legacy USB. AUTO
USB Devices Enabled : option disables
None legacy support if
no USB devices are
Legacy USB Support [Enabled] connected.
USB 1.1 Controller [Enabled]
USB 2.0 Controller [Enabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Enabled]