Foxconn MCP61PM2MA-8EKRS2H User Manual
Page 40
Chapter 3 BIOS Description
33
v
USB Resume from S3
This item is used to set the system to wake up by USB equipment when it is
in S3(Suspend to RAM)mode.
v
Resume by Alarm
This item is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be canceled. Also, the PC power
source must not be turned off. The setting values are: Disabled and Enabled.
v
Date (of Month) Alarm
When the Resume by Alarm set as “Enabled”, this item will be modified. It is
used to set the timing for the start-up date.
v
Time (hh:mm:ss) Alarm
When the Resume by Alarm set as “Enabled”, this item will be modified. It is
used to set the timing for the start-up time.
v
HPET Support
This option is used to enable or disable the High Precision Event Timer
Support.
v
PWRON After PWR-Fail
This item is used to set what action the PC will take with the power supply
when it resumes after a sudden power failure.
PDF 文件使用 "pdfFactory" 试用版本创建