Nuisance prevention (npc) – Directed Electronics PYTHON 872 User Manual
Page 30

27
© 2011 Directed Electronics. All rights reserved.
Table of Zones
Zone # (led flashes) Zone
Name
1
Trunk
2
Shock Sensor
3
Door
4
Sensor 2
5
Ignition
6
Hood
Nuisance Prevention (NPC)
NPC monitors all alarm zones and, if any are triggered excessively,
bypasses them until corrected. If a point of entry (trunk, hood, door)
is left open following a forced entry, it is bypassed. It becomes active
again only after being closed.
Bypassed sensors automatically reset after one hour and after the
vehicle is driven. Disarming then re-arming the alarm does not reset
bypassed sensors.