Foxconn nT-A3800 - Manual (Page 13)

2
8
3. Connect the Network Cable
Connect LAN cable to the RJ-45 port, with the other end connected to a hub or switch.
4. Connect the Power Cord
Connect the power adapter to the power input port of the NanoPC, and push the power but
ton to start it.
The power adapter is dissipating heat during normal use, please make sure not to
cover it and keep it away from your body to prevent discomfort or injury from heat
exposure.
C
AU
TI
O
N !
2
Outlet
1
3
or
Hub
Switch