Formax FD 180 - Manual (Page 11)

7
MAKING BOOKLETS
1. Select the appropriate paper size and adjust
stapler heads according to position reference
sticker (see page 2).
2. Open the top cover and insert a set of sheets
to be stapled. Align the paper with the edge
of the scale (fi g. 6).
3. Place the paper side guide by aligning it with
the edge of the paper (fi g. 7).
4. Use the cylindrical magnetic alignment stop-
pers if needed (fi g. 8).
Fig. 6
Fig. 7
Fig. 8
Fig. 9
5. Close the top cover. The machine will start
operation in 5 seconds. Once the fi rst booklet
is complete, remove it from the output slot on
the top. Insert the next set of sheets (fi g. 9)
and continue operation.