Formax FD 402A1 Operator Manual - Manual (Page 3)

DESCRIPTION
FUNCTION
The FD 402A1 High-Capacity Air Jogger aligns and dries printed
sheets in a single process while reducing static electricity.
Variable vibration speed and air pressure controls combine to
reduce jogging time, allowing press sheets and digital printouts
to be air-dried immediately.
1
SPECIFICATIONS
Variable Vibration Speed: Up to 3,000 vpm
Variable Air Control:
Up to 29,000 rpm
Bin Size: 3.75” D x 20.375” W
Media Size: 5” x 7” Min up to 11” x 17” Max
Sheet Capacity: Up to 940 sheets 20#
Dimensions: 16” W x 16” L x 43” H
Weight: 77 lbs.
Voltage: 110 Volts (50Hz)
Safety Certifi cations: CE approved
1. Check package for shipping damage. If there is shipping damage, do not discard the box.
2. Remove the machine and packed components from the box.
UNPACKING
SAFETY PRECAUTIONS
• Place the machine on a level and stable surface, to prevent it from falling over and causing personal injury
or damage to the machine. Avoid locations with direct sunlight, excessive dust and/or dirt, chemicals, salt or
vibrations.
• Connect the power plug to a grounded outlet and do not use any other voltage other than specifi ed on the serial
plate. Do not share a wall outlet with another piece of equipment as overheating could occur. Be sure to route the
power cable to the wall outlet in a way which will prevent people from tripping over it.
• When cleaning the machine, turn off the power fi rst, then unplug from the wall outlet.
• Do not dismantle or attempt to repair the machine. Do not lubricate or apply grease to the machine. Call for
service.