Formax FD 280-20 User Manual
Page 23
6/10
19
7.2 Service
If any problems occur with this equipment or if you
need assistance installing or operating your FD 280-
20 contact your FORMAX dealer.
7.3 Repacking
Instructions
If it is necessary to ship your FD 280-20 to your
FORMAX dealer for service, pack it in the original
shipping container and packaging material. If the
original container is not available, the FD 280-20
should be carefully packed so that it will not be
damaged in transit.
When calling for service, have your FD 280-20
’s
serial number handy.
NOTE
If the FD 280-20 is packed correctly, your
Shipping Carrier is liable for any damages that
occur during shipping.
Use the following instructions to pack the FD 280-20
with commercially available materials.
1. Double wrap the machine in heavy plastic.
2. Use a heavy duty, double-walled container of
350-pound test material.
3. Surround the FD 280-20 on ALL sides with at
least 4 to 5 inches of shock absorbing packaging
material. This will provide firm cushioning and
prevent movement inside the container.
4. Seal the top and bottom of the shipping container
with strong tape or banding material.
5. Clearly and legibly mark the shipping container
FRAGILE.
6. Contact your FORMAX dealer.