Formax FD 2052 Operator Manual, 4th Edition - Manual (Page 5)

OPERATION
1. Plug in cord and turn power on.
2. Lift load handle.
3. Load neatly stacked and squared paper into the hopper.
4. Adjust the side guides until they make light contact with the squared paper edges.
5. Make sure covers are closed properly.
6. Select the fold-type and press the test button to verify fold.
7. Press the start button to begin operation.
8. Set speed to desired setting.
SETTING CUSTOM FOLDS
Example 1: Uneven “Z”
a. Measure the length of panel “A” + “B”
b. Measure the length of panel “B”
c. Enter these measurements according to the
instructions on next page
Example 2: Uneven “C”
a. Measure the length of panel “A”.
b. Measure the length of panel “B”
c. Enter these measurements according to the
instructions on next page.
1. Measuring Fold Lengths
Panel A
Panel B
Panel A
Panel B
The Custom Folds Menu allows you to program custom folds into memory. The 2052 can store up to nine
custom folds. To store a custom fold into memory, follow these steps:
3