Formax FD 1502 Plus - Manual (Page 11)

7
TROUBLESHOOTING
B. Fold Quality Needs Improving:
1. Make sure paper is squared and installed correctly. Side guides should be evenly balanced and
snug against the paper.
2. If folds are still incorrect adjust fold plates (see fold plate adjustment on page 3).
D. Ready light is not illuminated and power is on:
1. Press the black circuit breaker button (Fig. 7) near the power cord inlet to reset the breaker.
E. Ready light is blinking red:
1. Check to see that the top cover is installed properly.
2. Check that the photo-eye, located before the metal sealer rollers, is clear of forms and/or paper
dust.
3. Check for paper jam. If paper is jammed, refer to instructions on page 9.
4. Motor may be overheated
C. Paper is not Folding Square (Skewing):
Figure 8
1. If paper pulls left or right adjust the skew. Turn
the skew adjuster, located under the infeed tray,
(Fig. 8) left or right until the paper is feeding
correctly.