Formax FD 1400 Quick Setup Guide & Test Sheet - Manual (Page 7)

OPERATION
Feed table lever
a. Remove printed forms from the printer and square them so they are in a neat stack.
b. Press down the feed table lever.
c. Place the neatly stacked forms onto the feed table with the glue edge leading (refer to “Determining Fold
Type” on Pg. 4).
d. Release feed table lever.
3. Starting and Stopping
2. Loading Forms
The green “READY” light will be lit when ready to operate. Press the Green “Start Button” to start and the red
“Stop” button when the feed tray is empty.
1. Power
Switch the power button, located under the infeed tray, to the on position.
Power switch
7