8 receiving inspection, 9 storage, 10 procedures, warnings, and cautions – Fluke Biomedical 90-12 User Manual
Page 8

Victoreen 90-12 
Operators Manual 
 
1-4
 
 
To avoid getting pinched when opening the BETA 
shield, twist sleeves and gently slide BETA shield 
apart. 
1.8 Receiving Inspection
Upon receipt of the package:
1. Inspect the cartons (s) and contents for damage. If damage is evident, file a claim with the carrier
and notify Fluke Biomedical, Radiation Management Services at 440.248.9300.
2. Remove the contents from the packing material.
3. Verify that all items listed on the packing list have been received and are in good order.
1.9 Storage
If the unit is to be stored prior to use, pack it in the original container if possible, and store in an 
environment free of corrosive materials, fluctuations in temperature, and humidity, and vibration and 
shock. 
Prior to use, check the condition and functionality of the probe. Also check that the calibration is still valid. 
Routine recalibrations are usually required by individual radiation safety programs. Please consult your 
local radiation safety office if you have any questions. 
1.10 Procedures, Warnings, and Cautions
The equipment described in this manual is intended to be used for the detection and measurement of 
ionizing radiation. It should be used only by persons who have been trained in the proper interpretation of 
its readings and the appropriate safety procedures to be followed in the presence of radiation. 
Although the equipment described in this manual is designed and manufactured in compliance with all 
applicable safety standards, certain hazards are inherent in the use of electronic and radiometric 
equipment. 
WARNINGS and CAUTIONS are presented throughout this document to alert the user to potentially 
hazardous situations. A WARNING is a precautionary message preceding an operation that has the 
potential to cause personal injury or death. A CAUTION is a precautionary message preceding an 
operation that has the potential to cause permanent damage to the equipment and/or loss of data. 
Failure to comply with WARNINGS and CAUTIONS is at the user’s own risk and is sufficient cause to 
terminate the warranty agreement between Fluke Biomedical and the customer. 
Adequate warnings are included in this manual and on the product itself to cover hazards that may be 
encountered in normal use and servicing of this equipment. No other procedures are warranted by Fluke 
Biomedical. It shall be the owner’s or user’s responsibility to see to it that the procedures described here 
are meticulously followed, and especially that WARNINGS and CAUTIONS are heeded. Failure on the 
part of the owner or user in any way to follow the prescribed procedures shall absolve Fluke Biomedical 
and its agents from any resulting liability. 
 
 
CAUTION
