Fluke Biomedical 451EXL User Manual
Page 17
Using the 451 Assistant for Excel
Options
3
3-9
451 Assistant General Options Menu
Serial Number - Displays the serial number of the 451 that is connected.
Log Parameters:
Data Log Memory is Cleared: – Allows the user to select when the 451 internal data log should be
cleared:
At Turn On Only – The 451 will only clear its internal data log when the unit is first turned on.
At Turn On and integrate reset – The 451 will clear its internal data log at turn on and at integrate reset.
Data Log Interval (1 to 255): - The 451 is capable of storing measured rate data in its internal memory.
The data log interval is the period, in seconds, at which the 451 adds a new data point to its internal data
log.
Clear Log – Pressing the Clear Log button clears the contents of the 451’s internal data log.
Blink Alarm:
Enable Blink Alarm At – A check in this box enables the Model 451’s blink alarm. The blink alarm level
and units may be entered in the boxes to the right.
SaveToEEPROM - Saves the configuration to the permanent EEPROM in the 451.