Fluke Biomedical 30-471 - Manual (Page 19)

Maintenance, Calibration, and Trouble Shooting
Maintenance
4
4-1
Section 4
Maintenance, Calibration and Troubleshooting
4.1 Maintenance
Due to the rugged construction of these detectors, periodic maintenance is not required.
4.2 Calibration
Over time, the amount of exposures the detector is subject to may result in damage to the detector. The
effect these exposures have is a reduction in the detectors original response.
In light of this characteristic of these detectors, they provide a high degree of reproducibility in their
outputs, even after a substantial accumulation of doses. When a significant change in the detector’s
response occurs, a calibration should be performed.
4.3 Troubleshooting
There are no troubleshooting procedures for the detector.