Fluke Biomedical 05-434 - Manual (Page 9)

Operation
Operation
3
3-1
Section 3
Operation
3.1 Operation
1. Connect the Primalarm to the Primalert as described in Section 2, Installation.
2. Make sure the Primalert is operating properly.
3. Plug in the converter power cord as described in Section 2, Installation. The green POWER
INDICATOR should light.
4. If the Primalarm audible/visual alarms should alarm continuously, there is a break in the cable
to the Primalert, or the Primalert has no input or internal power.
5. There is a panel switch on the front of the Primalarm which will disable the audible alarm. It
has no effect on the visual alarm.
6. The alarms of the Primalarm will actuate simultaneously with those on the Primalert with
which it is connected.
3.2 Routine Cleaning
Do not immerse the Model 05-434 Primalarm. The
unit is not waterproof. Liquid could damage the
circuits. The unit should be kept clean and free
from dirt and contamination. The unit may be
cleaned by wiping with a damp cloth using any
commercially available cleaning or decontaminating
agent.
CAUTION