Fluke Biomedical Ansur QA-ES plug-in Version 1.4.4 - Manual (Page 4)

4
2 Introducing the QA-ES plug-in
2.1 Test elements
After installing the QA-ES plug-in the QA-ES Performance tests
will be added to Ansur’s Test Explorer as shown below. Appendix
A lists all performance tests available in the QA-ES plug-in.
Each performance test is indicated with a light blue icon. Each
performance test element utilizes measurements available at the
QA-ES Electrosurgical Analyzer.
2.2 Test Element Definition.
Each test element is defined by the usual Ansur method. Custom Setup and Expected Results dialog boxes join
the familiar General Setup and Apply When dialog boxes.
2.2.1 Custom Setup Dialog Box
This dialog box enables the user to place limitations on how the test element is performed both on the hardware
and software configurations.
2.2.2 Expected Results Dialog Box
This dialog box contains the acceptable range that the test element must adhere to in order for it to pass. No
international standards are included with the plug-in and there is no facility for referenced limits.
The following chapters will detail the definition and use of each of the four performance test elements.