Automatic oven cooking – DeLonghi DMFPSII User Manual

Page 22

Figure 21

AUTOMATIC OVEN COOKING

To cook food automatically in the oven, it is necessary to:
1.Set the length of the cooking time
2.Set the end of the cooking time
3.Set the temperature and the oven cooking program.

These operations are performed as follows:

1.Set the length of the cooking time by pushing the

button and the

button

to advance, or

to go back if you have passed the desired time (fig. 21).

The AUTO and the

symbol will be on.

2.Set the end of the cooking time by pressing the

button (the cooking time already

added to the clock time will appear), and the

button (fig. 22); if you pass the

desired time you may get back by pushing the

button.

After this setting, the

symbol will go off. If after this setting, the AUTO flashes

on the panel and a buzzer sounds, it means there was an error in the programming.
If this is the case, modify the end of cooking time or the cooking time itself by
repeating the procedure above.

3.Set the temperature and the cooking program by using the switch and thermostat

knobs of the oven (see specific chapters).

The oven is now set to turn on and off at the programmed times.
During cooking, the

symbol remains on. By pushing the

button you can see

the time that remains until the end of cooking.
The cooking program may be cancelled in any time by pushing

At the end of the cooking time the oven will turn off automatically, the

symbol

will turn off, AUTO will flash and a buzzer will sound, which can be turned off by
pushing any of the buttons.
Turn the temperature and thermostat knobs to zero and set the programmer to “man-
ual” by pressing the

button.

Attention: A power failure resets the clock back to zero and cancels the set programs.
After a power failure, three zeros will flash on the panel.