Fluke Biomedical 76-903 - Manual (Page 7)

Specifications
Phantom Design
2
2-1
Section 2
Specifications
2.1 Phantom Design
All of the parts in the phantom are made with plastic and glass, free of magnetic material. The basic
design of the phantom is a 9” diameter plexiglass cylindrical container with various inserts filled with an
NMR signal producing solution. The phantom is designed to fit inside a head coil. The cylinder has three
sections, flood, cone, and insert section (Figure 2-1). The flood section is a typical flood phantom that can
be filled with a solution.
Figure 2-1.
The conic section has four concentric cones (Figure 2-2). The concentric conical grooves of 45° are cut
from a solid plexiglass block.
Figure 2-2.