Flowserve NRG 16-42 - Manual (Page 7)

7
Technical Data
continued
Corrosion resistance
When used for its intended purpose the safe functioning of the electrode will not be impaired by
corrosion.
Sizing
The electrode body must not be subjected to sharp increases in pressure. Welds and flanges of the
electrode are designed to withstand dynamic loading (bending and alternating stress). The dimensional
allowances for corrosion reflect the latest state of technology.
Name plate / marking
NRG 16-42
PN 40 G1 1.4571 IP 65
0,5 / 10µS/cm
Betriebsanleitung
beachten
See installation instructions
Voir instructions de
montage
32 bar ( 464 psi)
238 °C ( 453 °F)
Tmax = 70°C (133 °F)
Pmax
Tmax
IN/OUT: CAN-Bus
Münchener Str. 77, D-28215 Bremen
GB Reg. Design 2 053 113
US Pat. 5 719 342, 5 805 052,
Design 383 403
18-36 V DC
Node ID:__ __ __
TÜV.WR.99-399
GESTRA AG
SER Nr.:
Designation of
the equipment
Fig. 1