Flowserve NRGS 16-2 - Manual (Page 13)

13
The measuring range can be switch selected between
≥
0.5 µ S/cm and
≥
10 µ S/cm
by means of DIP switch :
1.Unscrew screws at the electrode terminal, remove cover , Fig. 6
DIP switch 1– 4 OFF Measuring range
≥
0.5 µ S/cm
DIP switch 1– 4 ON Measuring range
≥
10 µ S/cm
2.Replace cover and fasten screws
Standard setting
Factory setting
The compact system is delivered with the following factory settings:
■ Measuring range
≥
10 µ S/cm
Switch selection of measuring range
Attention
■ Screwdriver for cross head (“Phillips”) screws, size 1
■ Screwdriver for slotted screws, size 2.5; completely insulated according to
VDE 0680
■ Do not damage the electronic components when operating DIP switch.
Tools
J J J J J
D D D D D F F F F F
F F F F F D D D D D