Flowserve TRG 5-11 - Manual (Page 17)

7
Item Designation
Stock code Stock code
TRG 5-11 TRG 5-41
B
Sensing element 057 0568
F
Screwed socket ¾", material: .078 05599
E
Mounting flange 05600
G
Protection tube D4, 4 x 00 mm, .496 436
K
Twin PG thread 38700 38700
Maintenance
Spare parts
Replace sensing element
The sensing element B can be replaced during operation if necessary.
. Remove cover A, Fig. 7
. Disconnect wires from terminals.
3. Use a screwdriver to unscrew and remove the sensing element
B.
4. Insert new sensing element and fasten with a screwdriver.
5. Connect terminals according to wiring diagram,
Fig. 15
6. Mount cover A.
Decommissioning
Danger
Risk of severe burns and scalds to the whole body.
Before removing the temperature sensor make sure that the vessel or pipeline is
depressurised (0 bar) and cooled down to room temperature (0 °C).
Disposal
Remove the temperature sensor and separate the waste materials in accordance with the material
specification.
Electronic components (boards) must be disposed of separately.
For the disposal of the temperature sensor observe the pertinent legal regulations concerning waste
disposal.