Flowserve APEX 5000 Limit Switch Options - Manual (Page 2)

B00064-0 (AUTO-67) 7/00 Page: 2 of 2
© 2000, Flowserve Corporation, Provo, UT
Automax Valve Automation Systems
Installation, Operation and Maintenance Instructions
Figure 1 – Breather Piping
Operation and Maintenance:
Limit switches are simple and require no maintenance. However, it is suggested that periodic checks be made for
proper operation. There are no field-serviceable parts associated with the limit switch options.
Ordering Information:
The following is a list of replacement kit part numbers, as well as individual shaft assemblies and switch cards:
Switch Type Type K Type M Type N
Switch Kit* KMSAK KMSAM KMSAN
Shaft Assembly* SPSAK SPSAM SPSAM
Switch Card XA0102K XA0102M XA0104
*Note: The “A” in the fourth digit represents a standard linear positioner cam. Other positioner cams
are available (B = 30,45,60,90 degree linear, C = characterized, D = 60 degree butterfly valve cam).
Refer to the Apex 5000 sales bulletin or consult factory for more information.
6-1/2"
3/8" TUBING MIN.