Flowserve SuperNova Series - Manual (Page 4)

SuperNova Series
S050 - S200
Rack & Pinion AUTOMAX Actuators
Pag e 4/4
B00043e4-rev 3.doc
Flowserve Flow Control (UK) Ltd.
Burrell Road, Haywards Heath
West Sussex RH16 1TL
United Kingdom
Tel. + 44 (0)1444 314400
Fax +44 (0)1444 314401
E-mail: [email protected]
http://www.flowserve.com
PARTS & MATERIALS
ITEM
No.
DESCRIPTION STANDARD MATERIAL Quantity
D S
1 Body Hard Anodized Aluminium 1 1
2 Left Piston Die Cast Aluminium 1 1
2a Right Piston Die Cast Aluminium 1 1
3 Pinion Nitride Coated Steel 1 1
4* Pinion Washer Nylon 1 1
4a* Steel Pinion Washer Stainless Steel 1 1
5* Pinion Snap Ring Steel/Plated 1 1
6* Upper pinion O-ring Nitrile Rubber 1 1
7* Lower pinion O-ring Nitrile Rubber 1 1
8* Piston and end cap O-ring Nitrile Rubber 4 4
9 Inward travel stop bolt Stainless Steel 1 1
10 Inward travel retaining nut Stainless Steel 1 1
11 Inward travel spring Steel/Plated 1 1
12* Piston guide Nylon and Molybdenum Disulfide 2 2
13* Piston guide band Nylon and Molybdenum Disulfide 2 2
14 Stop bolt retaining nut Stainless Steel 2 2
15 Stop bolt washer Stainless Steel 2 2
16* Stop bolt O-ring Nitrile Rubber 2 2
17 Stop bolt Stainless Steel 1 1
18 Right end cap Die Cast Aluminium/Electrostatic Poly 1 1
19 Left end cap Die Cast Aluminium/Electrostatic Poly 1 1
20* End cap supply O-ring Nitrile Rubber 2 2
21 End cap screw Stainless Steel 8 8
22 Anti ejection device (optional) Nylon 2 2
23 Outer spring Spring Steel Coated 0 2 max
24 Middle spring Spring Steel Coated 0 2 max
25 Inner spring Spring Steel Coated 0 2 max
26* Top pinion bearing Hard Anodized Alumin ium 1 1
27* Bottom pinion bearing PEEK 1 1
28* Top bearing O-ring Nitrile Rubber 1 1
NOTES:
D= double acting actuators
S= spring return actuators
* parts included in a Repair Kit
SEALS:
Standard - Nitrile:
-30°C
÷ +80°C (-20°F ÷ +175°F)
H= High temp. – Viton:
-30°C
÷ +150°C (-22°F ÷ +302°F)
L= Low temp. – Fluorosilicon:
-50°C
÷ +80°C (-58°F ÷ + 176°F)
PRESSURE RATING:
10 bar (150 psi) max