Flowserve LPC Compact Actuator Series - Manual (Page 6)

1.9 Valve and Actuator Variations
These instructions cannot claim to cover all details of all possible product variations, nor can they provide information
for every possible example of installation, operation or maintenance. This means that the instructions normally include
only the directions to be followed by qualified personnel where the product is being used for its defined purpose. If
there are any uncertainties in this respect particularly in the event of missing product-related information, clarification
must be obtained via the appropriate Flowserve sales office.
1.10 Unpacking
• Each delivery includes a packing slip. When unpacking, check all delivered actuators and accessories using this
packing slip.
• Report transport damage to the carrier immediately.
• In case of discrepancies, contact your nearest Flowserve location.
• If necessary, retouch minor damage to the paint coating which may have occurred during transport or storage.
NOTE: When the actuator has ATEX or SIL requirements, ensure that the “LPC Series Safety Manual”
(Functional Safety and SIL Certification) and “LPC Series Safety Extract and Instruction Manual” (Explosive
Atmosphere Equipment and ATEX Certification) accompany this manual and are refer to equipment for usage.
LPC Compact Actuator Series FCD LFENIM0002-00-AQ 07/14
6