Flowserve Automax XCL UltraSwitch - Manual (Page 7)

7
Automax XCL/XML Switch Box User Instructions FCD AXENIM0120-13-A4 02/15
flowserve.com
4.2 Analog Feedback Option Specifications
Options T, D, E, S - 4-20 mA Transmitter
Voltage Supply: 6-30 VAC
Impedance: 300 Ohms at 20 mA
Options A, B, C - Potentiometer Output
Maximum Load: 1 Watt
Enclosure Ratings
NEMA 4, 4x, 7, and 9
IP67(CSA only) IP65 (ATEX)
5 Hazardous Location Approvals
All Switch Options
Flame-proof
ATEX(SIRA 06ATEX 3392X)
II 2 G Ex d IIB T5
II 2 D Ex tD A21 IP 65
T5 @ -20°C ≤ Tamb ≤ +55°C
EN 60079-0:2004
EN 60079-1:2004
EN 61241-0:2006
EN 61241-1:2004
IECEx
Ex d IIB T5
Ex tD A21 IP 65
T5 @ -20°C ≤ Tamb ≤ +55°C
IEC 60079-0:2004 (Ed.4)
IEC 60079-1:2003 (Ed.5)
IEC 61241-0:2004 (Ed.1)
IEC 61241-1:2004 (Ed.1)
InMetro
BR Ex d IIB T5
T5 @ -20°C ≤ Tamb ≤ +55°C
Mechanical Switch Options
Explosion-Proof (CSA)
Class I, Divisions 1, Groups C and D
Class II, Divisions 1, Groups E, F and G
Class II, Division 2, Groups F and G
Class III (CSA only)
FM U.S. Canada Intrinsically Safe Switch Options
Switch Type: MG, PE, PT, P4, N8, NQ, NP
Class I,II,II Division 1 Groups A, B, C, D, E, F, G T5
Proximity / Solid State Switch Options
Explosion-Proof (CSA)
Class I, Division 1, Groups C and D
Class I, Division 2 Groups A, B, C and D T3
Class II, Divisions 1, Groups E, F and G
Class II, Division 2, Groups F and G
Class III (CSA only)
NOTE: When using a sealed proximity switch (P4, P5, PP) in North
American Division 2 applications, a sealing fitting is not required.