Flowserve 51 Series Flanged Ball Valves - Manual (Page 4)

Flow Control Division
Worcester Controls
4 Z|x" - 2" 51/52 One-piece, Flanged Ball Valves WCAIM2014
When ordering parts, please provide the part name and following
information as found on the valve nameplate:
1. Valve size, style and revision number:
e.g., 1 /
2
" – 5146T 150 R2 Ball
2. Valve size, style and five-character code, known as a “P-Number”,
“T-Number,” “C-Number”, or similar, the designation for a non-
standard product:
e.g., 1 /
2
" 5266 RT 300 P3790 Stem
3. Porting (if a diverter valve) must also be specified when ordering
these parts:
e.g., 2" D5166 T 150 V1 R6 Ball
The terminology shown in the following exploded view parts listing is
standard. Please use when ordering parts.
1 1 /
2
" – 2" Size Valves Shown
View A-A
Item Qty Description
1 1 Body
2 1 Nameplate
3 1 Stem
4 1 Thrust Bearing
5 1 Ball
6 2 Seat
7 1 Body Seal
8a 1 End Plug ( 1 /
2
" - 1")
8b 1 End Plug (1 1 /
2
" - 2")
9 1 or 2 Stop Pin (Manual Valve Only)
10 1 or 2 Stem Seal (See Part D.3.c.)
11 1 Follower
12 2 or 4 Belleville Washer (See Part D.3.d.)
13 2 Retaining Nut
14 1 Lockwasher
15 1 Handle (Manual Valve Only)
16 1 Self-Locking Stem Nut (Automated Valve Only)
17 1 Stem Seal Protector
18 1 Thrust Bearing Protector