Flowserve Allpac MP - Manual (Page 4)

• A leakage rate of more than 30 drops per minute of the outboard seal signals off-
design leakage and should be thoroughly investigated.
• Excessive vibration of the pump should be investigated immediately.
5 Repairs
This product is a precision sealing device. The design and dimension tolerances are critical
to seal performance. Only parts supplied by Flowserve shall be used to repair the seal.
These are available from numerous Flowserve stocking locations. To order replacement
parts, refer to the part number, material code and description listed on the assembly
drawing.
Decontaminate the seal assembly and return it to Flowserve with an order marked
“Repair or Replace.” A signed certificate of decontamination must be attached.
A Material Safety Data Sheet (MSDS) must be enclosed for any product that came in
contact with the seal. The seal assembly will be inspected and, if repairable, it will be rebuilt,
tested and returned in its original condition.
All Flowserve Corporation, Flow Solutions Division, products must be installed in accordance with Flowserve
installation instructions. Failing to do so or attempting to change or modify Flowserve products will void
Flowserve’s limited warranty. Flowserve’s limited warranty is described fully in Flowserve’s Standard Terms and
Conditions of Sale. Flowserve makes no warranty of merchantability or fitness for a particular purpose and in
no event shall Flowserve be liable for consequential or incidental damages.
FIS156
ORG 07/02 USA
Flowserve Corporation Flow Solutions Division
Printed in U.S.A.
Germany Brazil Mexico
Kalamazoo, MI
Phone 269-381-2650
Fax 269-381-8368
United States
Roosendaal
Phone 31-165-581400
Fax 31-165-552622
Netherlands
Dortmund
Phone 49-231-6964-0
Fax 49-231-6964-248
Edmonton, Alberta
Phone 780-463-7958
Fax 780-450-1241
Canada
Sao Paulo
Phone 55-11-4066-8600
Fax 55-11-4066-7014 Tlaxcala
Phone 52-2-461-6791
Fax 52-2-461-6847 Phone 65-746-4318
Fax 65-747-1963 Osaka
Phone 81-720-85-5571
Fax 81-720-85-5575
Singapore Japan
Villa Martelli
Phone 54-11-4709-6800
Fax 54-11-4709-7072
Argentina Australia
Marayong NSW
Phone 61-2-8822-7100
Fax 61-2-9679-7511
Primary Worldwide Flow Solutions Division Locations Licensees, authorized agents, and affiliated companies located worldwide
www.flowserve.com
Scarborough, Ontario
Phone 416-292-2877
Fax 416-292-5190
ISO 9000
Certified