Flowserve 682 Seal Cooler - Manual (Page 3)

3
• Contains 300 Series Stainless Steel for all wetted parts to provide superior
corrosion resistance.
• Disassembles Easily without damaging the cooling coils for cleaning to
prevent scaling and cooler fouling from reducing operating efficiencies.
• Contains Seamless Cooling Coil Tubing separated by baffles that channel
the cooling water flow to prevent it from bypassing any of the cooling coils
and to provide the highest efficiency.
• Allows Complete Drainage and Venting of both the tube and shell side fluids
to prevent vapor lock conditions and ensure the highest efficiency.
• Can be configured for Series or Parallel Tube Flow to provide the cooling
characteristics needed.
• Available with an ASME Section VIII, Division 1 “U” Stamp for applications
where the equipment must be rated and verified as meeting the ASME
design requirements for pressure vessels.
• Provides Explosion Resistance through a pressure relief feature that
prevents the internal pressure from exceeding the allowable working
pressure of the inner and outer shells.
Product Specifications
Standard Materials:
• O-rings
Fluoroelastomer
• Tubing 316 Stainless Steel
• Fittings 316 Stainless Steel
• Shell and Covers 304 Stainless Steel
Technical Data:
• Cooling Coil Tube OD
19 mm (0.750 inch)
• Cooling Coil Tube Wall Thickness 2.4 mm (0.095 inch)
• Effective Cooling Area
0.51 m 2 (5.50 ft 2)
• Shell (Coolant) Flow Rate 24.6 to 75.7 l / min (6.5 to 20 gpm)
• Tube (Product) Flow Rate 7.6 to 37.9 l / min (2 to 10 gpm)
• Unit Weight (Empty) 62.1 kg (137 lbs)
• Maximum Temperature (Tube Side) 371°C (700°F )
• Maximum Temperature (Shell Side) 93°C (200°F), Canada 65°C (200°F)
• Max. Working Pressure (Tube Side) 255 Bar @ 371°C
(3,700 psig @ 700°F)
• Max. Working Pressure ( Shell Side ) 14.5 Bar @ 93°C (210 psig @ 200°F)